30
DXE-RADP-3 - Radial Plate, Stainless Steel with 20 Sets of SS Radial Attachment Hardware
The patented DX Engineering Radial Plate is meant for those of you that have or are building a quarter wave vertical
antenna and who want an easy, neat and effective way to connect those essential radial wires and the coax to your
vertical antenna for the lowest takeoff angle and strongest signals. DX Engineering Radial Plate is laser cut from
tough stainless steel so that it has smooth edges, won’t corrode and will always look good. You will be proud of how
good your installation looks. This plate will work perfectly with most commercially available vertical antennas such
as the Hustler® BTV series (4-BTV thru the 6-BTV), the SteppIR™ (BiggIR or SmallIR) or one of your own
construction.
DXE-RADP-1HWK - Radial Plate Wire Attachment Hardware Kit - Stainless Steel
20 Sets of ALL Stainless Steel Radial Hardware for use with the DX Engineering Stainless Steel Radial Plate.
(20) 1/4'' Bolts
(20) 1/4'' Nuts
(20) 1/4'' Flat Washers
(20) 1/4'' Split Washers
(20) 1/4'' Star Washers
DXE-SSVC-2P - Stainless Steel V-Clamp for steel pipe, 2 inch V-bolt
This V-Clamp is made in one size that fits Steel tubing or pipe from 1” to 2'' OD as used in antenna construction. The supplied V-bolt
is long enough to attach tubing to thick plates and is made with anti-corrosive properties. The special Stainless Steel saddle has
serrated teeth will clamp to the pipe securely by biting into the surface. For this reason, it is not recommended for
softer aluminum tubing or pipe. Ideal for fastening a radial plate and antenna mounting to a steel pipe.
Used to clamp 1 to 2'' (OD) steel tubing or pipe
Designed for attachments that don't require resistance to torque
V-bolt and saddle made from high-strength 18-8* stainless steel
*The use of an anti-seize compound is HIGHLY recommended to achieve proper torque and prevent galling.
UMI-81343, DXE-NSBT8 - Anti-Seize & Never-Seez
®
An Anti-seize compound MUST be used on any Stainless Steel nuts, bolts, clamps or other hardware to prevent galling
and thread seizure. Any of these products can be used for this purpose.
*
UMI-81343
Anti-Seize, 1 oz. Squeeze Tube
*
UMI-81464
Anti-Seize, 8.5 oz. Aerosol Can
*
DXE-NSBT8
Never-Seez
®
, 8 oz. Brush Top
*
DXE-NMBT8
Never-Seez
®
, 8 oz. Brush Top, Marine Grade
* These products are limited to domestic UPS Ground shipping only
DXE-P8A - Penetrox™ A Anti-Oxidant - 8 oz Squeeze Bottle
Use Penetrox™ A electrical joint compound to affect a substantial electrical connection between metal parts such as
telescoping aluminum tubing or other antenna pieces. Ensures high conductivity at all voltage levels by displacing moisture and
preventing corrosion or oxidation. For Aluminum to Aluminum, Aluminum to Copper, or bare conductors. Not recommended
for use with rubber or polyethylene insulated wire.
8 oz. squeeze bottle
* This product is limited to domestic UPS Ground shipping only
DXE-RADW-500KBD or 1000KBD - Bulk Radial Wire Kits and Components
To achieve optimal performance with a ground-mounted vertical, install as many radials as possible. These bulk radial
wire kit use insulated wire that is UV resistant, hard to see and lies down easily, unlike the wire that is commonly
available at the big box stores. It will last much longer in contact with soil than bare wire. The biodegradable anchors
allow easy installation of radial wires, and will degrade and disappear in a year or so when they are no longer needed.
The
DXE-RADW-500
or
1000KBD
kit provides everything you will need to build the perfect radial system!
500/1000 ft. spool of 14 AWG, stranded copper wire with vinyl insulation
20/40 lugs
100/200 biodegradable radial wire anchor pins- Eliminating the need to bury your radials!
Build up to 20/40 radials, 25 feet long
DXE-RADW-500KBD
Bulk Radial Wire Kit, 500 ft Spool of Wire, 20 Lugs, 100 Biodegradable Staples
DXE-RADW-1000KBD
Bulk Radial Wire Kit, 1000 ft Spool of Wire, 40 Lugs, 200 Biodegradable Staples
