DX Engineering RLS-2 Manual Download Page 8

Page: 8 / 8

DXE-CW9-1K - Shielded Control Wire, 9 conductor, 1000 ft reel

DXE-CW9 - Shielded Control Wire, 9 conductor, per foot

DXE-CW9-1K is a 1000 foot box of high quality shielded outdoor FTP (Foil Twisted Pair) Cat5e cable.  It features 4
Twisted pairs of 24 AWG solid wire with Al foil shielding plus a solid tinned copper drain wire - providing a total of 9
conductors for DC switching applications.  It has a polyethylene jacket and is rated for direct burial. This cable is ideal for
DX Engineering Remote Antenna Switches and Four Square arrays,  and should be considered for any low-current custom
remote switching application you have - such as receiving antenna arrays. A nice feature is the "rip cord", which allows for
easy stripping of the heavy jacket without worry about nicking or accidentally cutting the conductors. Excellent for use in
all outdoor applications of switching, networking, data transfer and phone lines.  As a data transfer line, it supports
10/100/1000Mbps.

DXE-LL450-1K - Ladder Line, 450 ohm - 1000 ft. Spool
DXE-LL450-5C - Ladder Line, 450 ohm - 500 ft. Spool

Transmit-quality 450 ohm ladder line for your antenna project when the feedpoint impedance is close to 400 Ohms. It
is also ideally suited for use with our Reversible Beverage Antenna, the RBS-1P. This quality line is constructed of 16
gauge conductors that are formed by 19 strands of 29 gauge copper-clad steel wire which provides the strength to hold up
for long runs between supports. Actual impedance is nominally 40 0 Ohms with a nominal velocity factor of 91%.

1000' or

500' Spool

- Conductor AWG(strand): 16 (19/29) - Nominal Impedance: 400 Ohms - Velocity factor of 91%

Technical Support

If you have questions about this product, or if you experience difficulties during the installation, contact DX
Engineering at (330) 572-3200. You can also e-mail us at:

[email protected]

For best service, please take a few minutes to review this manual before you call.

This unit is RoHS (Reduction of Hazardous Substances) compliant. The components, including the solder used are all
lead free. If you decide to do any modifications or internal repairs, you should use only lead free solder and lead free
soldering tools. Lead free solder melts approximately 100 degrees higher than the old leaded solder, so you may
need to upgrade your current soldering system.

Warranty

All products manufactured by DX Engineering are warranted to be free from defects in material and workmanship for a period of one (1) year from
date of shipment. DX Engineering’s sole obligation under these warranties shall be to issue credit, repair or replace any item or part thereof which is
proved to be other than as warranted; no allowance shall be made for any labor charges of Buyer for replacement of parts, adjustment or repairs, or
any other work, unless such charges are authorized in advance by DX Engineering. If DX Engineering’s products are claimed to be defective in
material or workmanship, DX Engineering shall, upon prompt notice thereof, issue shipping instructions for return to DX Engineering (transportation-
charges prepaid by Buyer). Every such claim for breach of these warranties shall be deemed to be waived by Buyer unless made in writing. The above
warranties shall not extend to any products or parts thereof which have been subjected to any misuse or neglect, damaged by accident, rendered
defective by reason of improper installation, damaged from severe weather including floods, or abnormal environmental conditions such as prolonged
exposure to corrosives or power surges, or by the performance of repairs or alterations outside of our plant, and shall not apply to any goods or parts
thereof furnished by Buyer or acquired from others at Buyer’s specifications. In addition, DX Engineering’s warranties do not extend to other
equipment and parts manufactured by others except to the extent of the original manufacturer’s warranty to DX Engineering. The obligations under
the foregoing warranties are limited to the precise terms thereof. These warranties provide exclusive remedies, expressly in lieu of all other remedies
including claims for special or consequential damages. SELLER NEITHER MAKES NOR ASSUMES ANY OTHER WARRANTY
WHATSOEVER, WHETHER EXPRESS, STATUTORY, OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND
FITNESS, AND NO PERSON IS AUTHORIZED TO ASSUME FOR DX ENGINEERING ANY OBLIGATION OR LIABILITY NOT STRICTLY
IN ACCORDANCE WITH THE FOREGOING.

©DX Engineering 2017

DX Engineering