7
DXE-RPA-1 - Receiver Preamplifier, 0.3-35 MHz
This is the best HF low noise amplifier available. The
RPA-1
is optimized for 0.3-35 MHz operating range. The push-pull amplifier
design and robust components enable it to withstand high signal levels and operate when you need it most. The dynamic range of the
RPA-1
is better than most receivers. The
RPA-1
is suitable for indoor or outdoor installation, with the option of being powered
through the coaxial feed. The metal housing provides shielding and improved lifespan. The unit uses RCA type phono jack and
CATV F connector for the input and output connections, and has a relay that automatically bypasses the amplifier when dc power is
removed.
Benefits:
Push-pull operation eliminates harmonic distortion
High quiescent current increases ability to handle strong signals without distortion or overload
Meticulous craftsmanship and durable components provide superior dynamic range
RCA type phono jack and type F connector ease installation
Simplified switching - automatic bypass eliminates gain when dc power is off
10-18 Vdc power using power connector or through the coax
10-18 Vdc through coax enables remote operation at antenna
DXE-F6 - 75 Ohm F-6 Style, Direct Bury Coaxial Cable: Full Spool or Custom Cable Assemblies
DX Engineering recommends using a high quality 75 Ω “flooded” F6 type coaxial cable. Flooded style cables have the
distinct advantage of automatically sealing small accidental cuts or lacerations of the jacket. Flooding also prevents shield
contamination and can be direct-buried. This low-loss cable features dual shields and an 85% Velocity Factor..
Custom cable assemblies are available, Call DX Engineering for details.
DXE-SNS6
Snap-N-Seal connectors are
recommended for use with this coaxial cable to ensure a high quality and weather resistant feedline connection. The proper
tool
DXE-SNS-CT1
must be used to install these connectors.
DXE-CPT-659 - Coax Cable Stripper for CATV F-6, RG-6 and RG-59 coax
Prepares CATV F-6, RG-6 and RG-59 coax cable for the installation of an "F" type connector.
One-step cutting motion - Precision cut - No nicks or scratches to conductor - Includes 1 replacement blade
DXE-SNS6-25 - Watertight Coaxial Connector, Snap-N-Seal for CATV F-6 Cable, 25 pieces
Snap-N-Seal is an environmentally sealed CATV F coaxial connector system for harsh environments. The connectors have a unique,
360 degree radial compression system that offers the signal leakage protection required for high performance receive systems.
Quad sealed system prevents moisture from migrating into the connection
360 degree radial compression provides superior RF integrity (-95dB typical, 60% bonded foil cable)
Easy cable preparation
Connector to cable retention of 40 lbs minimum
Superb impedance match to 1 GHz
Manufactured of high quality 360 brass, cadmium plated with yellow chromate coating for maximum corrosion resistance
UV-resistant plastic and O-rings provide a reliable environmentally sealed connector
An installation tool, such as the
DXE-SNS-CT1
is required to install the connectors. Normal crimping tools or pliers will not work.
PTX-82180 - Permatex RTV Sealant
Permatex Black RTV Sealant, Non-Acetic. We have all used RTV to seal water out of things, right? Have you
ever sealed a piece of electronic gear with it -- then opened it some time later to find that it had still managed to
become corroded inside? Guess what? It's not the rain that corroded it - It's the RTV! Normal RTV gives off
acetic acid when it cures. That's the vinegar smell. The acetic acid causes the corrosion. Applies just like "normal"
RTV, dries in one hour and cures in 24 hours at 70 degrees F. And it doesn't smell like vinegar!
3.3 oz. Tube - Black
*This part is classified hazardous and is limited to domestic UPS Ground shipping only
DXE-SNS-CT1 - Compression Tool for Snap-N-Seal 75 Ohm Coaxial Connectors
Ratchet compression tool for installing
DXE-SNS6
Snap-N-Seal coaxial connectors.
Ordinary pliers will not install these connectors properly.
