- 7 -
Optional Items
UMI-81343, UMI-81464, DXE-NSBT8, DXE-NMBT8 - Never-Seez & Anti-Seize
An Anti-seize compound MUST be used on any Stainless Steel nuts, bolts, clamps or other hardware to prevent galling
and thread seizure. Any of these products can be used for this purpose.
Anti-Seize, 1 oz. Squeeze Tube
Anti-Seize, 8.5 oz. Aerosol Can
Never-Seez, 8 oz. Brush Top
Never-Seez, 8 oz. Brush Top, Marine Grade
* These products are limited to domestic UPS Ground shipping only
DXE-SSVC-2P - Stainless Steel V-Clamp for steel pipe, 2 inch V-bolt
This V-Clamp is made in one size that fits Steel tubing or pipe from 1" to 2'' OD as used in antenna construction. The
supplied V-bolt is long enough to attach tubing to thick plates and is made with anti-corrosive properties. The special
Stainless Steel saddle has serrated teeth will clamp to the pipe securely by biting into the surface. For this reason, it is not
recommended for softer aluminum tubing or pipe. Ideal for fastening a radial plate and antenna mounting to a steel pipe.
Used to clamp 1 to 2'' (OD) steel tubing or pipe
Designed for attachments that don't require resistance to torque
V-bolt and saddle made from high-strength 18-8* stainless steel
The use of an anti-seize compound is HIGHLY recommended to achieve proper torque and prevent galling.
DXE-RADP-3 - Radial Plate, Stainless Steel w/ 20 Sets of SS Radial Attachment Hardware
The DX Engineering Radial Plate is meant for those of you that have or are building a quarter wave vertical
antenna and who want an easy, neat and effective way to connect those essential radial wires and the coax to your
vertical antenna for the lowest takeoff angle and strongest signals. DX Engineering Radial Plate is laser cut from
tough stainless steel so that it has smooth edges, won’t corrode and will always look good. You will be proud of
how good your installation looks. This plate will work perfectly with most commercially available vertical
antennas such as the Hutsler BTV series (4BTV thru the 6BTV), the SteppIR (BiggIR or SmallIR) or one of your
own construction
DXE-3M2155
-
3M Temflex™ 2155 Rubber Splicing Tape
.
Conformable self-fusing rubber electrical insulating tape. It is designed for low voltage electrical insulating and moisture
sealing applications. For outdoor use, it should be protected from UV deterioration with an overwrap of
TRM-06133
TRM-06133 - Scotch® Super 33+
.
Highly conformable super stretchy tape for all weather applications. This tape provides flexibility and easy handling for
all around performance. It also combines PVC backing with excellent electrical insulating properties to provide primary
electrical insulation for splices up to 600V and protective jacketing. Both tape products are available from DX
Engineering.
UMI-82180 - Permatex Black RTV Sealant, Non-Acetic - 3.3 oz Tube, Black DX Engineering Approved RTV
Sealant
By Permatex
We have all used RTV to seal water out of things, right? Have you ever sealed a piece of electronic gear with it -- then opened it
some time later to find that it had still managed to become corroded inside? Guess what? It's not the rain that corroded
it - It's the RTV! Normal RTV gives off acetic acid when it cures. That's the vinegar smell. The acetic acid causes the
corrosion.
DX Engineering has located a Neutral Cure RTV made right here in Ohio that is non-corrosive and is safe for sealing
those baluns and other electronic gear that are going to be out in the weather.
Applies just like "normal" RTV, dries in one hour and cures in 24 hours at 70 degrees F. And it doesn't smell like vinegar!
3.3 oz. Tube
Black
*This part is classified hazardous and is limited to domestic UPS Ground shipping only
