- 17 -
DXE-RADP-3
- Radial Plate
(patented)
:
Made from Laser Cut Stainless Steel with 20 Sets of Stainless Steel Radial Attachment Hardware. The
DX Engineering Radial Plate is meant for those of you having a vertical antenna and want an easy, neat
and effective way to connect those essential radial wires to your antenna system for the highest efficiency
and strongest signals.
DXE-SSVC-3P - Stainless Steel V-Clamp for 2 to 3 inch steel pipe
This V-Clamp is made in one size that fits Steel tubing or pipe from 2 to 3'' OD as used in antenna
construction. The supplied V-bolt is long enough to attach tubing to thick plates and is made with anti-
corrosive properties. The special Stainless Steel saddle has serrated teeth will clamp to the pipe securely by
biting into the surface. For this reason, it is not recommended for softer aluminum tubing or pipe. U-Bolt
thread dimensions: 3/8"-16 x 1.75". V-bolt and saddle made from high-strength 18-8 stainless steel
DXE-RADP-1HWK - Radial Plate Wire Attachment Hardware Kit
Additional 20 Sets of ALL Stainless Steel Radial Hardware for use with the DX Engineering Stainless Steel
Radial Plate.
(20) 1/4'' Bolts - (20) 1/4'' Nuts - (20) 1/4'' Flat Washers
(20) 1/4'' Split Washers - (20) 1/4'' Star Washers
PTX-81343, DXE-NSBT8 - Anti-Seize & Never-Seez®
An Anti-seize compound MUST be used on any Stainless Steel nuts, bolts, clamps or other hardware to
prevent galling and thread seizure. Any of these products can be used for this purpose.
*
PTX-81343
Anti-Seize, 1 oz. Squeeze Tube
*
PTX-81464
Anti-Seize, 8.5 oz. Aerosol Can
*
DXE-NSBT8
Never-Seez®, 8 oz. Brush Top
*
DXE-NMBT8
Never-Seez®, 8 oz. Brush Top, Marine Grade
* These products are limited to domestic UPS Ground shipping only
DXE-RADW - 500K or 1000K Radial Wire Kits and Components
To achieve optimal performance with a ground-mounted vertical, install as many radials as possible. These bulk radial
wire kits use insulated wire that is UV resistant, hard to see and lays down easily, unlike the wire that is
commonly available at the big box stores. It will last much longer in contact with soil than bare wire. The
DXE-RADW- 500K or 1000K kit provide everything you will need to build the perfect radial system!
500/1000 ft. spool of 14 AWG, stranded copper wire with vinyl insulation
20/40 lugs
100/200 radial wire anchor pins - eliminating the need to bury your radials!
Build up to 20/40 radials, 25 feet long
DXE-RADW-500K
Bulk Radial Wire Kit, 500 ft Spool of Wire, 20 Lugs, 100 Staples
DXE-RADW-1000K
Bulk Radial Wire Kit, 1000 ft Spool of Wire, 40 Lugs, 200 Staples
DXE-225RT-20 - Ring terminal 16-14 Wire Gauge, 1/4" hole/20 Pack
\his is a set of 20 ring terminals for AWG #14 to #16 wire with a clearance hole for a 1/4" bolt. These are the
same crimp terminals supplied with the DXE Radial Wire Kits for #14 Radial and Antenna Wire.
