- 14 -
The hardware does not have to be removed from the manual winch to either install or remove
the manual winch from the winch mounting plate.
There are three holes with slots in the mounting bracket. The flat washers will fit through the
large holes. Once in place, push the winch inward (toward the antenna elements) allowing the
three bolts to go into the three slots. Tighten the hardware to hold the winch in place.
Connect the Hook from the manual winch strap to the Antenna Hook Mount as shown below.
To remove the winch, simply reverse this sequence.
3. To lower your antenna, ensure the winch hook is in the Antenna Hook Mount. Remove the four
bolts and hardware that hold the Pivot Lock Plate to the Pivot Base Winch Mount Plate. You
can now use the winch to pivot the antenna downward.
Four Bolts to be removed to allow for pivoting
