- 3 -
Manual Updates
Every effort is made to supply the latest manual revision with each product. Occasionally a manual
will be updated between the time your DX Engineering product is shipped and when you receive it.
Please check the DX Engineering web site (
) for the latest revision manual.
NOTE: Some older versions of the TW Antennas are not compatible with current production
parts. The original manufacturer of TW Antennas had changed the design more than once
and newer parts will not fit some older models. Call DX Engineering to verify if your old TW
Antenna will be compatible with currently produced parts and assemblies.
Additional Material Needed/Suggested but not Supplied:
Coaxial Cable -
Minimum of 65 feet in length. Suggested coaxial cable is the DX
Engineering
DXE-8XDX075
-
RG-8X, 16 AWG Copper, Type II-A Non-Contaminating
PVC Jacket, with PL-259s on each end.
Guy Rope and Anchors
– should be used if the antenna is subjected to winds or blowing
snow conditions.
Tools Required
Phillips Screwdriver - to open the center sections for fine tuning.
Although the TW antennas are tuned at the factory, you may need to fine tune your antenna for
optimum efficiency and operation. The Rig Expert line of Antenna Analyzers will facilitate the fine
tuning of the TW Antenna:
REU-AA-230 Zoom
https://www.dxengineering.com/parts/reu-aa-230zoom
C6ADX Portable
