DX Engineering DXE-TW Series Instructions Manual Download Page 12

Page: 12 / 12

- 11 -

4) Repeat for remaining bands.

Repeat the tuning process for the 15 m, 17 m, and 20 m bands, in

that order.

For the manual tune center section model, the testing is the same as described above. The only
difference is that the two jumpers for the specific band must be installed. For the mono-band
center sections there is only one band to adjust. The number of coils will vary depending on
the model.

Guy Rope and Anchor Installation

In cases where the antenna may be subject to winds or conditions that may cause the antenna to be
blown down, guying is suggested. For temporary installations if the conditions are not harsh, you
may find that putting rocks or weights (example: gallon jugs with water) on the Quadrastand legs
will provide the security needed. If conditions are a bit harsher, you may want to use rope and
screw-in earth anchors. Screw-in earth anchors and sufficient antenna rope are available from DX
Engineering to allow guying of the antenna.

Technical Support

If you have questions about this product, or if you experience difficulties during the installation,
contact DX Engineering at (330) 572-3200. You can also e-mail us at:

[email protected]

For best service, please take a few minutes to review this manual before you call.

Warranty

All products manufactured by DX Engineering are warranted to be free from defects in material and workmanship for a period of one (1) year from
date of shipment. DX Engineering’s sole obligation under these warranties shall be to issue credit, repair or replace any item or part thereof which is
proved to be other than as warranted; no allowance shall be made for any labor charges of Buyer for replacement of parts, adjustment or repairs, or
any other work, unless such charges are authorized in advance by DX Engineering.  If DX Engineering’s products are claimed to be defective in
material or workmanship, DX Engineering shall, upon prompt notice thereof, issue shipping instructions for return to DX Engineering (transportation-
charges prepaid by Buyer). Every such claim for breach of these warranties shall be deemed to be waived by Buyer unless made in writing. The above
warranties shall not extend to any products or parts thereof which have been subjected to any misuse or neglect, damaged by accident, rendered
defective by reason of improper installation, damaged from severe weather including floods, or abnormal environmental conditions such as prolonged
exposure to corrosives or power surges, or by the performance of repairs or alterations outside of our plant, and shall not apply to any goods or parts
thereof furnished by Buyer or acquired from others at Buyer’s specifications. In addition, DX Engineering’s warranties do not extend to other
equipment and parts manufactured by others except to the extent of the original manufacturer’s warranty to DX Engineering.  The obligations under
the foregoing warranties are limited to the precise terms thereof. These warranties provide exclusive remedies, expressly in lieu of all other remedies
including claims for special or consequential damages. SELLER NEITHER MAKES NOR ASSUMES ANY OTHER WARRANTY
WHATSOEVER, WHETHER EXPRESS, STATUTORY, OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND
FITNESS, AND NO PERSON IS AUTHORIZED TO ASSUME FOR DX ENGINEERING ANY OBLIGATION OR LIABILITY NOT STRICTLY
IN ACCORDANCE WITH THE FOREGOING.

©DX Engineering 2018

DX Engineering