7
DXE-RTR-1A
Receive Antenna Interface for Transceivers
- Front Panel
Figure 1
PWR ON-OFF
Toggle Switch -
DXE-RTR-1A
power on and off. +12 Vdc power is supplied via the rear
panel center positive connector.
RX ANT - ACTIVE
indicator
One Red LED (Light Emitting Diode) illuminates to indicate the
DXE-RTR-1A
is in the
receive mode. This LED extinguishes when MAIN ON is selected or when keyed with RX
ANT selected.
PWR
indicator
One Green LED (Light Emitting Diode) illuminates to indicate the
DXE-RTR-1A
is powered
and turned on.
MAIN ON - RX ANT - MAIN ON
toggle switch
Three position (On-On-plus Momentary) provides manual control of the
DXE-RTR-1A
antenna selections.
MAIN ON
(up) - Manually switches RADIO to the MAIN ANT for receiving with the
transmitting antenna. RADIO remains connected to MAIN ANT during transmit.
RX ANT
(center) - Switches the RADIO to the RX ANT for receive mode and allows
automatic switching of the RADIO to the MAIN ANT during transmit.
MAIN ON
(momentary on when pressed down) - Manually switches RADIO to MAIN ANT
momentarily for a fast check of reception on the transmitting MAIN ANT.
