21
Optional Items
DXE-WP-102 - 102 inch Stainless Steel Whip
This 102'' whip antenna is made from the finest 17-7 ph tapered stainless steel which resists bending and kinking. This material is so
tough it can be bent 180 degrees and will spring back to its original shape. Dissipation tip to reduce unwanted static buildup. Fits all
3/8 x 24 threaded mounts.
Can be bent 180 degrees and will spring back to its original shape
Resist bending and kinking
DXE-CAVS-1P - V-Bolt Saddle Clamp, 1/2 in. to 1-3/4 in. OD Applications
This V-Clamp is made in one size that fits tubing from 1/2 to 1-3/4'' OD as used in antenna construction. The supplied V-bolt is long
enough to attach tubing to thick plates and is made with anti-corrosive properties. The cast rippled surface of the saddle will clamp
the tubing securely to a flat surface; however, for high-torque applications please use our standard U-Bolt Saddle Clamps.
Used to clamp 1/2 to 1-3/4'' (OD) tubing
Designed for attachments that don't require resistance to torque
V-bolt made from high-strength 18-8* stainless steel
V-saddle cast from 535 aluminum with rippled surface
The use of an Anti-Seize compound is HIGHLY recommended to achieve proper torque and prevent galling.
DXE-F6-1000 - 75 Ω F-6 Style Direct Bury Coax, 1000 ft. Spool Hi Quality "Flooded" Coax
Sold by the spool, or as Custom Cable Assemblies
Center Conductor:
18 AWG Copper-Clad Steel , Nominal Diameter: 0.040 in.
Dielectric:
Gas Expanded Polyethylene, Nominal Diameter Over Dielectric: 0.180 in.
Shield:
1st Shield: Aluminum-Polypropylene-Aluminum, Laminated Tape with overlap Bonded to the Dielectric,
Nominal Diameter Over Tape: 0.187 in.
2nd Shield: 34 AWG Aluminum Braid Wire, 60% Coverage
Jacket:
PE (Flooded for Underground), Nominal Diameter Over Jacket: 0.272 in. , Nominal Jacket Thickness: 0.030 in.
Electrical Properties:
Impedance: 75.0 +/- 3.0 Ωs, Velocity of Propagation: 85.0% Nominal
We recommend the use of Snap-N-Seal connectors to ensure a high quality and weather resistant feedline connection. The proper
tool must be used to install these connectors.
DXE-CPT-659 - Coax Cable Stripper for CATV F-6, RG-6 and RG-59 coaxial cable
Prepares CATV F-6, RG-6 and RG-59 coaxial cable for the installation of an "F" type connector.
One-step cutting motion
Precision cut
No nicks or scratches to conductor
Includes 1 replacement blade
DXE-SNS6-25 - Watertight Coaxial Cable Connector, Snap-N-Seal for CATV F-6 Cable, 25 pieces
Snap-N-Seal is an environmentally sealed CATV F coaxial connector system for harsh environments. The connectors have a unique,
360 degree radial compression system that offers the signal leakage protection required for high performance receive systems.
Quad sealed system prevents moisture from migrating into the connection
360 degree radial compression provides superior RF integrity (-95 dB typical, 60% bonded foil cable)
Easy cable preparation
Connector to cable retention of 40 lbs minimum
Superb impedance match to 1 GHz
Manufactured of high quality 360 brass, cadmium plated with yellow chromate coating for maximum corrosion resistance
UV-resistant plastic and O-rings provide a reliable environmentally sealed connector
An installation tool, such as the
DXE-SNS-CT1
, is required to install the connectors. Normal crimping tools or pliers will not work.
