2
Introduction
The
DXE-RFS-SYS-3P
Receive Four Square 160/80/40m Electronics Package
is for the
advanced amateur radio operator who wants to build an active receive antenna system with vertical
antenna elements of their own design using the highly sophisticated DX Engineering receive four
square control system.
The
DXE-RFS-SYS-3P
Receive Four Square 160/80/40m Electronics Package
is a packaged
system which includes:
DXE-EC4
Four position BCD Control Console
DXE-RFS-3
Receive Four Square Array Controller
DXE-AVA-2
(four) Active Matching units with Internal Disconnect Relays
(the heart of the
DXE-ARAV3-1P
Receive Antenna Active Vertical antennas)
DXE-RPA-1
Receiver Preamplifier is also included to assure adequate signal level when
short passive antennas are used
Three Custom Delay Lines
- The three delay lines included are based on a 70 foot square
physical layout for 160, 80 and 40 meter performance
Just add your own short vertical whips - or your four monoband passive verticals - to create a
four-direction receiving array.
It allows the system designer unprecedented freedom to build a
complete custom receiving system.
This patented (
US Patent Number 7,423,588
) system array configuration embodies unique phase
and time shifted combining for stable broadband performance.
The
DXE-RFS-SYS-3P
is a sophisticated receiving system that is designed to be used with four
identical vertical symmetrically spaced elements to provide switching for a 4-direction receiving
antenna system. The system uses time delay phasing rather than the conventional narrow-band,
frequency dependent phasing systems. The time delay phasing is directivity-optimized to produce
wider and deeper rear nulls and a narrower main lobe. The result is that noise and undesirable
signals are greatly reduced for a superior front-to-rear ratio (F/R). Better control of phase and
currents provides a cleaner pattern than found on available transmit four square arrays.
This system offers greater reliability in receiving applications. The
DXE-RFS-SYS-3P
uses sealed
relays sized for receiving applications with silver contacts to prevent oxidation and contamination.
Most transmitting four square switches use large open-frame relays where the contacts are exposed
to air which can lead to contamination. Relays with brass contacts can oxidize leading to poor
conductivity.
Advantages of the RFS-SYS Receive Four Square Antenna System over other small or medium-size
receiving arrays include:
Reduced susceptibility to high angle signals compared to EWE, Flag, Pennant, and K9AY
antennas
Excellent directivity in a small space for better signal-to-noise ratio
Switchable in four 90 degree spaced directions
