- 4 -
Remove the AVA from the existing black mounting plate
Orient the new black mounting plate with the
antenna mounting holes close to the top, as shown
below. Mount the
AVA-2
matching unit with the
ANT +
terminal toward the top and the F-
Connector toward the bottom. Use the 5/8" hex head bolts, flat washer under each bolt, flat and split
washer under each hex nut.
Loosely install the two new
stainless steel U-Clamps on
the black mounting plate
using the U-Bolt, V-Clamp,
flat washers, split washers
and hex nuts as shown
.
The following shows a complete drawing with the newer style antenna and details installation.
When replacing and existing newer style antenna, use this diagram to identify where the parts are
installed.
