DX Engineering DXE-8040-30AOK, Manual

Page: 7 / 16

- 7 -
Middle Assembly
1. The Middle assembly uses the following parts. Refer to
Figure 1 for an exploded view.
Quantity Middle Assembly Parts Description
1 Stainless Steel Laser Cut 30 Meter AOK Mounting Arm
1 31 Meter AOK Insulated Bracket # 2
2 2.500" Studded Element Clamp w/ Stainless Steel Hardware
2 # 10-24 x 3/4" Stainless Steel Carriage Bolt
2 # 10 Stainless Steel Flat Washer
2 # 10 Stainless Steel Split Washer
2 # 10-24 Stainless Steel Hex Nut
Middle Assembly Parts
2. To install the two 3/4" carriage bolts into the 30 Meter AOK insulated bracket, use a flat washer
and hex nut. Tighten the nut until the carriage bolt is fully seated on the insulator. Once
fully seated, remove the hex head nut and washer. Install both carriage bolts from the same side
on the insulator as shown in
Figure 9 .
Figure 9