- 8 -
Radial Wire Hardware Installation
Radial Wire Pattern
Overall Pivot Base (
US Patent No. 8,130,168
) Assembly Drawing
The exploded view drawing is for reference and shows the overall Pivot Base Assembly.
(See
Parts List
for detailed drawing with numbered parts)
Pivot Base and Lower Antenna Assembly
1. Locate the heavy duty Extren
®
insulated channel.
There are 12 holes drilled in the insulated channel.
The top of the insulated channel is identified by two
holes located very near the top side.
2. Locate the stainless steel bottom hinge plate, backing plate, four carriage bolts, four 3/8" flat
washers, four 3/8" split lock washers and four 3/8" hex nuts. Assemble the bottom hinge to the
bottom of the heavy duty insulated channel as shown below.
