- 26 -
Mating the Vertical Element to the Pivot Base Assembly
1. To lower the antenna, ensure the winch hook is in the Antenna Hook Mount. Remove the four
bolts and hardware that hold the Pivot Lock Plate to the Pivot Base Winch Mount Plate. You
can now use the winch to pivot the antenna downward.
Four Bolts to be removed to allow for pivoting
2. Locate the 3-1/2" long 1/4" bolts,
four stainless steel flat washers
and two 1/4" stainless steel
Nyloc nuts. Align the 3" OD base
section element with the
assembled vertical elements.
Slide the 2.75" element section
into the 3" OD base element
section aligning the 4 holes.
