DWT KF06-30, Original Instructions Manual

Page: 18 / 136

18
English
Power tool specifications
Edge trimmer KF06-30
Power tool code
[127 V ~50/60 Hz]
[230 V ~50/60 Hz]
748694
748663
Rated power [W] 650
Power output [W] 330
Amperage at voltage
127 V [A]
230 V [A]
3
5�5
No-load speed [min
-1
] 34000
Collet inner Ø
[mm]
[inches]
6 / 8
1/4" / 5/16"
Stroke of the router base
[mm]
[inches]
30
1-3/16"
Weight
[kg]
[lb]
1,25
2�76
Safety class
Sound pressure [dB(A)] —
Acoustic power [dB(A)] —
Weighted vibration [m/s
2
] —
Noise
information
Always wear ear protection if the sound
pressure exceed 85 dB(A).
Declaration of
conformity
We declare under our sole responsibility that the prod-
uct described under "Power tool specifications" is in
conformity with all relevant provisions of the direc-
tives 2006/42/EC including their amendments and
complies with the following standards:
EN 62841-1:2015,
EN 62481-2-14:2017,
EN 55014-1:2017,
EN 55014-2:2015,
EN 61000-3-2:2014,
EN 61000-3-3:2013�
Certification Wu Cunzhen
manager
* - for power tools with voltage 230 V�
Merit Link International AG
Stabio, Switzerland, 30�01�2020
General
safety rules
WARNING - To reduce the risk of injury,
user must read instruction manual!
WARNING! Read all safety warnings, in-
structions, illustrations and specifications
provided with this power tool. Failure to fol-
low the warnings and instructions may result
in electric shock, fire and / or serious injury.
Save all warnings and instructions for future refer-
ence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operat-
ed (cordless) power tool�
Work area safety
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents�
• Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable liq-
uids, gases or dust. Power tools create sparks which
may ignite the dust or fumes�
•
Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to lose
control�
Electrical safety
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter