DWT BWT PERMAQ Pico 10-90 Installation And Operating Manual Download | Manualshive

Page: 4 / 64

background image

1 | Information about the installation and operating manual

OPM BWT PERMAQ® Pico Rev. 2.0 EN

EN

4

1 Information about the installation and operating

manual

1.1 Purpose of this document

This installation and operating manual is a part of the reverse osmosis device BWT PERMAQ®
Pico and contains important notes and information for the whole service life of the device.

Reading and following the installation and operating manual

ü

The installation and operating manual contains important information for using the device
safely and efficiently for its intended purpose.

ü

The illustrations in these instructions are provided to aid basic understanding and may de-
viate from the actual design of the device. Claims cannot be made based on this.

ü

All legal claims are stated in the general terms and conditions (GTC).

1. Keep the installation and operating manual at hand in the immediate vicinity of the device

at all times as a quick operating reference for personnel.

2. Retain the installation and operating manual for future use.

3. Follow the accident prevention regulations and general safety provisions of this installation

and operating manual to avoid dangers and operate the device in a reliable and econom-
ical way.

1.2 Meaning of symbols and text highlighting

The following symbols and text highlighting are used in this document.

Symbol/text highlighting

Meaning

Ready

Menu text on the display

OK button

Confirmation button

↑ → ↓ ←

Arrow buttons

Prerequisite for an instruction

a), b), c)

Action steps

Result of the listed instruction

Table

1: Display conventions

This symbol indicates useful tips, recommendations and information that help to ensure effi-
cient and trouble-free operation.

1.3 Meaning of safety symbols

The following warning and safety information is used in this installation and operating manual.
Warnings and instructions are introduced by signal words that highlight the extent of risk.

DANGER

The signal word “Danger” warns of an imminent danger that causes severe injuries or death.

WARNING

The signal word “Warning” warns of a potentially dangerous situation that could cause severe
injuries or death.

«
...
2
3
4
5
6
...
»

Summary of Contents for BWT PERMAQ Pico 10-90

































































Reviews:

No comments

Related manuals for BWT PERMAQ Pico 10-90

Brand: Water Factory Systems Pages: 15

Brand: Watts Premier Pages: 28

Hydro-Guard HG-3

Brand: Mueller Pages: 7

XC Filter Cartridge EV9613-09

Brand: Everpure Pages: 2

ThunderFog Series

Brand: Task Force Tips Pages: 20

Nitrogen Pac SC-W

Brand: UNITED Pages: 112

Brand: Rain Bird Pages: 8

Brand: Reliable Pages: 4

Brand: ITech Pages: 14

Brand: Rain Master Pages: 72

Brand: Rain Bird Pages: 1

Brand: AquaTru Pages: 40

Brand: Xsential Pages: 7

Brand: DEKA Controls Pages: 5

Brand: Cuckoo Pages: 32

Brand: Cuckoo Pages: 96

Brand: entegris Pages: 8

Brand: Viking Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands