69
Network Setup -
Port Forwarding
After entering the correct TCP/IP settings, you
are ready for ‘Port Forwarding’
(Cases A, B).
1
Please record the TCP/IP settings of your IP Camera for
future reference. You may need this information to access
your IP Camera and to configure ‘Port Forwarding’.
2
After clicking ‘Apply’, the system will prompt for a reboot.
Please allow the system 50 seconds to reboot and accept
the changes. After 50 seconds, close the configuration
screen. The view will display ‘Trying to Reconnect’.
If the ACTIVE light on the IP Camera has gone off and is
now back on again flashing, the IP Camera has rebooted.
After the system reboots completely, remove the power
supply from the unit and close Internet Explorer.
3
Return your PC/Laptop TCP/IP properties to their original
settings.
4
Before installing the IP Camera, you must use
‘Port Forwarding’ on your router (Cases A, B).
You will need to forward 1 port:
· Web Port
All the ports will be forwarded to the IP address you
assigned to the IP Camera.
In the example above, you would forward:
· 8888 > 192.168.0.200
i
For information on how to use ‘Port Forwarding’,
please read Appendix C.
IP Address
Subnet Mask
Default Gateway
Preferred DNS Server
DDNS Server
Web Port
IP Camera TCP/IP Settings