DVTEL TRK-101-P, Installation Manual

Page: 23 / 36

Installing and Connecting the Unit
11
3.2.4 Connecting the Video Source (Camera) to the Unit
The unit is designed to accept a composite video signal (1Vp-p) from an analog PTZ camera. Video
connections should use a 75Ω cable and should not be longer than 30 meters (98 feet).
To connect the video source to the unit
1. Securely connect the video cable BNC connector to the analog video output of the camera or
video source.
2. Connect the other cable end to the VIDEO IN connection on the video connection panel of the
unit. See Figure 4: trk-101-P Video Connection Panel (page 4).
To set the unit’s video standard via its web interface
1. Enter the IP address of the
unit in a browser. The unit’s
Login window opens.
2. Login to the unit by entering your user name and password. The default user name and
password are both “admin”. The web interface opens.
3. If your computer requires ActiveX installation, install it now.
4. From the Live View window, access the Camera Setup by clicking
Setup > Camera >
Streaming . The Streaming window opens.
Figure 11: Web Interface Streaming Window
5. In the Video Standard field, select PAL or NTSC .
6. Click Apply to save the setting.
Note:
If the video standard is changed, all analytic settings will be deleted.