DVS SDStationOEM, Installation Manual

Page: 14 / 46

1-4
SDStationOEM Installation Guide
1.4 Safety Instructions
To use the SDStationOEM correctly please heed the following:
General
The SDStationOEM has been built according to the applying safety
regulations. To minimize the possibility of a faulty operation of the de-
vice all manuals and guides must be available at all times at the op-
eration site. Before installing and/or using the SDStationOEM the
manuals and guides delivered with the SDStationOEM must be read
and observed.
– Use the SDStationOEM only in apparent good technical order.
– The system you are trying to connect the SDStationOEM to usu-
ally work with voltages that can be hazardous to your health.
Never access its interior with the power cable(s) being plugged in.
Make sure the power supply is disconnected from the compo-
nents you are working on before opening its casing.
– Computer hardware contains components that are sensitive to
electrostatic discharge. If you touch them without precautionary
measures they can be destroyed. Use a wrist strap connected to
ground when accessing electronic parts. Avoid touching the com-
ponents of the computer and the SDStationOEM.
– Computer hardware contains components that are very sensitive
to changing voltages. Connecting or disconnecting the
SDStationOEM to or from peripheral hardware while any of them
is switched on may damage the hardware. Switch off all periph-
eral hardware before connecting or disconnecting anything.
– Use the board only in compliance with the technical data laid out
in section “Technical Data” on page A-1.
– The SDStationOEM may not be misused, abused, physically
damaged, neglected, exposed to fire, water or excessive changes
in the climate or temperature, or operated outside maximum rat-
ing.
– Do not perform any changes or extensions to the SDStationOEM
whatsoever.
Please read the following safety instructions very carefully
before attempting any installation and/or performing any
work on the SDStationOEM.
If the SDStationOEM is not used in compliance with the
safety notes, the warranty and all resulting liability claims
will be void.