Operation manual - Spider ILD01G
21 / 53
rev. 02-15-02-2017
7 DISPLAYS
7.1 RADIO CONTROL DISPLAYS
Indicator (11) flashes - Radio Control power on indicator
Radio controll emits a high pitch tone - Radio Control battery low voltage
warning
7.2 MOWER DISPLAYS
1. Power indicator
2. Signal Reception
3. Neutral
4. Blade
On the cover of the battery there are a number of warning LEDs and an hour meter. Identify the version you
have.
The displays signal the following states:
Power Indicator:
Illuminated green when the EMERGENCY STOP on the top of the mower is unlocked.
Beacon is flashing when the EMERGENCY STOP on the top of the mower is
unlocked.
Signal Reception
Illuminated green when the radio link between the RC and the receiver is established
and correct.
Neutral:
Illuminated green when the transmission is in a neutral position.
Blade:
Illuminated red when the blade is engaged.
After the power supply is turned on, indicator lamp 1 will be illuminated. It will flash for seven seconds, during
this period the following actions take place:
•
Initialisation of the processor, check of radio connection and check the communication with the
hydraulic pump servo-motor. If the checks are successful lamp 1 will illuminate. If a malfunction is
detected lamp 1 will flash.
•
When there is communication between the machine and the radio control unit, lamp 2 flashes. If there
is a break in communication lamp 2 dims.
•
Lamp 3 is illuminated when the drive servomotor is in a neutral position.
•
Lamp 4 is illuminated while the blade is engaged. The mower cannot be started while this lamp is
illuminated.
1