Operation manual - Spider ILD01G
12 / 53
rev. 02-15-02-2017
4 SPECIFICATION
4.1 SPECIFICATION
TECHNICAL DESCRIPTION
The mower is a self-propelled machine with four-wheel drive, controlled by the transmitter (remote radio
controller) signal. Its unique wheel-steering technology ensures a high manoeuvrability both on level ground and
on slopes.
The basic part of the machine is formed by a square solid frame, which is connected with a sliding frame. The
middle part of the sliding frame carries all transmission parts such as the engine, the hydraulic pump, the oil
cooler and the control unit. A cutter blade is attached to the bottom part of the frame. An electromagnetic clutch
is placed between the blade carrier and the engine.
Transmission is by chains and gears on all four wheels. The wheels are driven centrally by the hydraulic drive
through V-belts. The wheels are steered by an electric motor.
The control unit is situated in a box above the cover of the gel battery. The mower is controlled by a multi-
channel transmitter.
Parametr
Unit
Value
Length/Width
mm (inch)
1340
×1200 (52,7×47,2)
Height
mm (inch)
910 (35,8)
Mowing width
mm (inch)
800 (31,5)
Mowing blade height
mm (inch)
60 - 110 (2,36
– 4,33); 30 - 80 (1,18 - 3,14)
continuous regulation
Weight
kg (pound)
245 (540)
Driving speed
km/h (mph)
0
– 3, 0 – 7 (0-2, 0-4,5)
Mowing mechanism
-
Single-balde with a fixed balde attached by the
flange int the middle
Mowing clutch
-
Electromagnetic with a friction brake
Hydraulic pump
Hydro Gear BDP 21L
Hydraulic motor
-
Sauer Danfoss OMP 40
Propelled wheels
-
4 x 4
Travel wheel
inch
16x6,5 - 8 with and arrow (V) tread pattern
Battery
12 V, 18 Ah, gel
Fuel
-
unleaded gasoline
Fuel tank capacity
l (galon)
11 (2,9)
Engine
Air-cooled four-stroke two cylinder
Kawasaki FS541V
Cylinder volume
cm
3
603
Performance
kW/min-1
13,4/3600
Torque
N.m/min-1
46/2200
Ignition
Electronic
Starter
Electric
Frequency range of the
Remote controller NBB for
EU and USA
MHz
434.050 - 434.750
4.2 NOISE EMISSIONS
The mower emits the following noise: Sound pressure level
L
WA
= 96,0 dB
Guaranteed Sound pressure level
L
WA
= 97,0 dB
The measuring was carried out in conformity with EN ISO 3744
Noise at the operator
’s station (ear): L = 77,9 dB (A) Leq – Measured in the distance of 3m from the machine
according to EN 11201