Typical Application
Introduction
High Performance
– The DVI-7345 is an ultra-compact, high performance fiber optic extender
that supports SDI, HD-SDI and 3G-SDI extension over a single strand of Single-Mode optical fiber at
distances up to 1.2 miles (~ 2000 meters). The extender set consists of an optical transmitter module
that converts the SDI signals into light pulses for transmission over a single strand of Single-Mode
optical fiber cable. An optical receiver module converts the light pulses back to an SDI signal for
downstream processing or display on a monitor.
Superior Design
– The transmitter includes an SDI signal EQ, a Laser driver and a laser diode
module that uses a single optical wavelength of 1310nm. The receiver includes an SDI copper cable
driver, a photo diode, a TIA, as well as a limited amplifier. Both Tx and Rx use low-profile, metal
cases equipped with rugged locking 75ohm BNC SDI connectors. The locking ST fiber connectors are
supplied with twist-locking metal covers to prevent dust buildup inside the fiber optic connectors.
These features make the DVI-7345 the perfect solution for extension of SDI, HD-SDI, and 3G-SDI
signals over extreme distances in even the most demanding broadcast, studio, and live environments.
DVI-7345
3G-SDI Fiber Optic Extender, 1x ST
Quick Start Guide
DVI-7345 3G-SDI Fiber Optic Extender, 1x ST
1
Source Device
(e.g. SDI Camera)
Display Device
(e.g. SDI Monitor)
DVI-7345-TX
DVI-7345-RX
One Single-Mode ST optical cable
AC Power Adapter
AC Power Adapter
DVIGear and DVIGear & Design are trademarks of DVIGear, Inc. and
may not be used without the prior written permission of DVIGear, Inc.
