DVDO Quick
6
23
A.04
Serial Control
The serial port allows anexternal home automation system to control Quick
6
. All menu and remote
commands are available as well as a series of queries to determine the status of Quick
6
. Contact DVDO for
a detailed command reference.
Troubleshooting:
Issue:
Possible Resolution:
Quick
6
or other
sources turn off
unexpectedly,
Quick
6
or sources
power down when
TV is turned off
This is caused by CEC commands from the TV instructing other devices to power
down when it is switched off. If this is undesired behavior, uncheck the “CEC Enable”
box in the advanced settings menu on Quick
6
. This essentially tells Quick
6
to ignore
CEC commands. They will still be passed through Quick
6
to the sources.
Blu-ray pauses
when a different
input on Quick
6
is
selected
This is caused by CEC commands from Quick
6
instructing other devices to power
down or pause when switched. If this is undesired behavior, uncheck the “CEC
Enable” box in the advanced settings menu on Quick
6
. This essentially tells Quick
6
to
ignore CEC commands. They can still be passed through Quick
6
however to the
sources.
Slow response from
Quick
6
– menu
system, switching
Uncheck the “CEC Enable” box in the advanced settings menu of Quick
6
. Excessive
CEC commands can cause unexpected behavior.
Source is not
recognized by
If a source does not cause the corresponding input LED to light with an amber color
(indicating that an active source is plugged in to an HDMI port), move that source to
HDMI Input 6 and then check the “HDMI 6 Power” box in the advanced settings in the
