4
• SDI Card
• Bulkhead BNC connector with nut and washer
• Stand-offs (qty. 2)
• BNC-to-BNC Cable
• Hole-plug screws (qty. 2)
• RS-232 serial data cable
1
Remove the iScan HD/HD+ top cover. To do this,
a.
Remove three screws on each side of the unit.
b.
Remove two screws on the top of the unit.
c.
Remove one screw at the rear
of the unit.
d
. Lift the top cover from the rear of
the unit and set it aside.
2
Remove the metal plate
that covers the hole for
the SDI BNC connector.
I N S TA L L AT I O N A N D S E T- U P
Installing the PrecisionSDI module into your iScan HD/HD+
Contents
Step 1a
Step 1b
Step 2
Step 1c
