12
3
Make sure Binary mode is selected.
4
Locate the ‘.abt’ file to download. Only files with a ‘.abt’ extension
should be loaded. If any other file is loaded, an error will occur.
If this happens see the troubleshooting section.
5
Click the ‘Open’ button to send the file.
6
Data is now being transferred to your iScan HD. You should see the
word “BUSY” scrolling on the Front Panel. You will also see the
download status on your PC.
7
When the update is complete you will see ‘VRFY’ momentarily dis-
played on the Front Panel Display. This is the iScan HD checking its
software to be sure it is correct. The download process may take up to
5 minutes to complete.
8
When the update process is complete, the front panel light will turn
green.
9
Your iScan HD with your new PrecisionSDI Input Module upgrade is
now ready to use. To select the SDI input, use the SDI button on the
remote control, or select the SDI input using the front panel button
labeled
Input Select
.
Software Update
(continued)
