10
DVDO-KVME-1_V1.0.0
DVDO-KVME-1 4K KVM Extender over IP User Manual
DVDO
Installation and Wiring
Installation
Note: Before installation, ensure the devices are disconnected from the power
source.
Steps to install the device in a suitable location:
1.
Attach the installation bracket to the enclosure using the screws that were
provided in the package separately.
2.
The bracket is attached to the enclosure as shown.
3.
Repeat steps 1-2 for the other side of the unit.
4.
Attach the brackets to the surface you want to hold the unit against using
the screws (provided by others).
5.
Repeat above steps for another unit.
Wiring
Application 1 -
Connect Transmitter to Receiver Directly
The DVDO-KVME-1 could be connected directly with a Cat 5e or above cable.
As a normal extender set, it extends the HDMI and USB signals over a long
distance up to 120m/395ft.
