6
DVDO-KVME-1_V1.0.0
DVDO-KVME-1 4K KVM Extender over IP User Manual
DVDO
Receiver
Technical
Input/Output
1 x LAN (RJ45)
1 x HDMI OUT (19-pin female HDMI Type-A)
3 x USB DEVICE (female USB Type-A)
1 x 4-Pin DIP Switch
1 x DC 12V connector with locking
Input/Output Signal Type
Compressed IP streams
Output Resolution
Supported
640x480
8
, 800x600
8,10
, 1024x768
8,10
,
1280x720
6,7,8,9,10
, 1280x768
8,10
, 1280x800
8,10
,
1280x960
8,10
, 1280x1024
8,10
, 1360x768
8
,
1366x768
8
, 1440x900
8,10
, 1600x900
8
,
1600x1200
8
, 1680x1050
8,10
,
1920x1080
1,2,3,4,5,6,7,8,9,10
, 1920x1200
8
,
3840x2160P
2,3,5
, 4096x2160P
2,3,5
1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4 = at 29.97
Hz, 5 = at 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at
60 Hz, 9 = at 100 Hz, 10 = at 120 Hz
Output Audio Format
Supported
PCM 2.0 / 2.1 / 5.1 / 7.1, Dolby Digital 5.1 ch,
Dolby Digital Plus, Dolby TrueHD, DTS 5.1 ch,
DTS-HD High Resolution Audio, DTS-HD Master
Audio
Maximum Data Rate
9 Gbps
Maximum Pixel Clock
300 MHz
Transmission Distance
Cat 5e or above
:
120m/395ft
HDMI: 15m/49ft
USB Consumption
Not more than 0.5A per USB port is
recommended
General
Operating Temperature
0 to + 45°C (32 to + 113 °F), 10% to 90%,
non-condensing
Storage Temperature
-20 to +70°C (-4 to +158 °F), 10% to 90%,
non-condensing
ESD Protection
Human Body Model:
±8kV (air-gap discharge)/
±4kV (contact discharge)
Power Supply
DC 12V 1A
Power Consumption
< 4W (without USB Consumption)
Unit Dimensions
(W x H x D)
112mm × 17.8mm × 65.2mm / 4.41’’ × 0.70’’ ×
2.57’’
Unit Weight
(without accessories)
0.18kg/0.40lb
