DVDO DVDO-C3-1, User Manual

Page: 28 / 46

28
COMMUNICATION SETUP
COMMUNICATION SETUP
Protocol VISCA
V_Address 1
V_AddrFix Off
Net Mode Serial
Baudrate 9600
Select Item
Change Value
[Menu] Back

Protocol: Select protocol type: Auto, VISCA, PELCO-D, PELCO-P.

V_Address: Select 1 ~ 7. (Effective only in Auto, VISCA protocols)

V_AddrFix: Select On / Off.

P_D_Address : Select 0~254. (Effective only in PELCO-D protocol)

P_P_Address : Select 0~31. (Effective only in PELCO-P protocol).

Net Mode : Set serial port network control to Serial / Parallel.

Baudrate : Select serial port baud rate to 2400 / 4800 / 9600 / 38400.
RESTORE DEFAULT
RESTORE DEFAULT
Restore? No
Change Value
[Home] OK
[Menu] Back

Restore: Confirm restore factory settings, Yes / No.
Note: Press [HOME] button to confirm restoring all parameters to default,
including IR Remote address and VISCA address.