INSTALLATION
MANUAL
855-680-9595
NEED HELP?
STEP
1
STEP
3
If vehicle is equipped with factory
sensors, lay out the harness over the
bumper and begin to feed the harness
into the bumper cavities so that the
sensors lay near their corresponding
holes.
Note: The large plug on the harness needs
to be on the driver side of the bumper.
Note: If your vehicle is not equipped with
sensors, use provided sensor plugs and
skip to step 6.
STEP
2
Place the bumper face down on a soft
surface to prevent any damage to the
coating.
INSTALLATION OF DV8 BUMPER
Begin by unpacking all items and
inspecting for missing pieces or
damage. If you have any concerns,
please contact the company the
product was purchased from.
(6) M12x50mm Bolts
(6) M12 Split Washers
(12) M12 Flat Washers
(4) M6x20mm Bolts
(4) M6 Lock Nuts
(8) M6 Flat Washers
Hardware Included
:
