INSTALLATION
MANUAL
855-680-9595
NEED HELP?
STEP
4
STEP
6
Lean the bumper back and fit the
sensor bezels into place.
Note: Our bumpers are designed to accept
both factory metal bumper and plastic
bumper sensor bezels. All cutouts are cut
differently to ensure each bezel is placed
into the correct hole. They should easily
pop into place.
Using the welded in zip tie tabs,
secure the wiring harness to the
bumper.
While holding the front of the sensor
bezel, push the sensor into the bezel,
until the sensor clicks into place.
Repeat steps for all sensors.
STEP
5
