ENGLISH
Cod. 710.0134.20.00 Rev06B
– 04.2016
5
Pic 1
In order to optimise the use of the dryer, we suggest to place it in such a way that all the control
instruments of the machine will result easily visible.
Installing a ceramic pre-filter on the air inlet of the dryer, this will be better protected from eventual solid
particles, as it prevents the accumulation of oily materials on the heath exchangers.
3. START UP
3.1 CONTROL PANEL
The machines belonging to this series are provided with an electronic system for parameters modification, so eventual
reset operations can be performed by means of the digital panel located on the front of the dryer.
The control panel illustrated in PIC.1 is composed of 5 keys (ON/OFF, TEST, SET, DOWN e UP) and a 3 digit display,
with three signalling LEDs indicated by DP1 DP2 DP3.
Under normal operating conditions the display controller shows the temperature read by the probe without decimal
degrees. When an alarm condition occurs, the display shows the relevant alarm code.
Pic.2 control panel
1
Air Compressor
2
Aftercooler
3
Condensate Separator
4
Receiver
5
Automatic Drain
6
Ceramic Pre
filter 10μ
7
Dust Filter 5
μ
8
Dryer
9
Solenoid drain valve
10
Coalescing Filter 1
μ - 0.1 mg/m
3
11
Coalescing Filter 0.01
μ – 0.01 mg/m
3
12
Activated carbon filter 0.003 mg/m
3
13
Water/Oil Separator
Water
E
c
o
tro
n
E
c
o
tro
n
Water
Summary of Contents for HTD AL 18
Page 2: ...1 ...
