Location and QTH locator:
They will be shown on the Xreflector page
If you do not have your QTH (grid) locator, go to
http://qthlocator.free.fr/index.php
to find out.
D-STAR, DMR, C4FM and P25:
select the mode you want to use
Power:
Adjust the power output - see technical data
RX-QRG:
this is the frequency the DV4mini receives on. When using DMR it is
also the transmit frequency.
TX-QRG:
in D-Star mode you can operate in duplex mode (not in DMR) and you
can enter the transmit frequency here
After inputting these the DV4mini will store them.
Reflector selection:
select a reflector of your choice (in D-Star also specify the
port) and click “CONNECT” to create a connection or “DISCONNECT” to end an
existing connection.
You can select D-Star and Fusion reflectors by using the touch tone (DTMF)
feature. For example to change to reflector DCS024C type D2403. In C4FM it
would be A and the room number = A10.
“#” disconnects from the room. In DMR you cannot use DTMF.
Info field:
the information which is displayed here will be transmitted. For
example the picture, which is stored in www.qrz.com for a received callsign, is
shown. You can choose what you want to be shown by using the buttons below
the info field.
Below that you see the S-meter. The RSSI value will be stored over a 24 hour
period and shown in the RSSI window. The noise levels may be different from
PC to PC. Values of -90 to -120 dBm are possible.
17
