Installer’s Guide
Electric Boosted Solar
23
H3163 025247 Rev. C
Gpo
Step 24
• Install a Weatherproof GPO for the
system.
• This water heater requires the
following electrical connections:
1.
Solar Pump Module
–
CONTINUOUS TARIFF must be
used.
2.
Supplementary Electrical
Boost Element
(3.6kW) – Off
Peak recommended, single
phase 240V A.C. supply. A 15
amp power supply is needed.
• Separate continuous electrical
power must be supplied to the
Hotlogic controller. This ensures the
protection features are enabled.
Warning: Power cables
should be routed away from
any hot water pipes. If this
is not practical, insulate the
hot water pipes to avoid
direct contact with the power
cables.
Note: This water heater is
designed to allow the tank
boost to be connected to
continuous or off peak power
supply. Large daytime users
of hot water that exceed the
capacity of the off peak boost
option should connect to
continuous supply.