first two minutes is the warm up. The speed and the incline do not change with the
changing of pulse. The window will display WARM UP.
If there is not pulse value after two minutes, the window will display NO HRC. The
treadmill will stop after a moment. If there is pulse value, it will display HRC mode.
After the warm up, it will change the speed and the incline value every 15 seconds. You
change the speed 5 times, the incline can be changed once. The speed change 0.2km/h
each time, the incline will change 1% each time. Under the HRC mode, press
“SPEED+/SPEED‐“key to adjust the value.
RUNNING MODE
MANUAL MODE
Press “SPEED+/SPEED‐”key to change the speed value and press “/INCLINE‐” key
to
change the incline value.
TARGET
The USER can choose the TIME DISTANCE CALORIES target value.
PROGRAM
Speed and incline of each section can be changed during running.
Can use shortcut key to change speed and incline value.
STOP
Treadmill will retain the original running display when stop running in any setting running
state. It will back to waiting mode unless press STOP key.
SAFETY KEY
Put the safety key to the right place, the treadmill will run. If you put out the safety key
in the running state, the treadmill will stop quickly.
AUDIO ON/OFF
Use AUDIO ON/OFF key to control the output power of music player.
PULSE
Put hands hold pulse to test pulse value during running.
The Display Range
Initial
value
Countdown
setting initial
value
Countdown
setting value
Display range
Time(mm:ss)
0:00
20:00
5:00~99:00
0:00~99:59
Speed(km/h)or
(ml/h)
0.00
N/A
N/A
1.0~20.0km/hr
Distance(kml)
0:00
N/A
N/A
0:00~999.59
Calories
0
N/A
N/A
0~999.59
Pulse(bpm)
HP
N/A
N/A
40~240
Incline(%)
N/A
N/A
N/A
0~15
Age
N/A
N/A
N/A
10~99
27
