EN
Step 4
Put the Table Half (H4) on the carton with playing surface facing on the floor.
Attach the Legs Tube (P4) to the board with the Metal Bracket (P6), Bolt (H6) and Washer
(H11), see Fig.4.1.
Attach the Long Linkage Tube (P10) to the leg (P4) with Bolt (H2) and Nut (H7) and Small
Bushing (H8) as shown in Fig.4.2.
Attach the Safety Catch (P8) into the table half with Bolt (H6), Washer (H11) and Nut (H12),
then attach the Safety Catch Ring (P7) to the end part (hole) of the Safety Catch (P8), as shown
in Fig.4.4.
Make sure the Safety Catch works properly by pulling the Safety Catch ring from inside the
board.
Attach the Short Linkage Tube (P5) to the table top metal side with Bolt (H5), Nut (H7) and
Washer (H9). See Fig. 4.3.
Repeat the same assembly for the other Table Half (H4).
22
