EN
Assembly Instructions
Open the box and position the two play surfaces face down on the cardboard.
Note: Make sure that at least two adults handle the table at all times during assembly.
Step 1
Attach two wheels (P1) to the Undercarriage (P2) tightly, with Bolt (H1) and Nut (H7). Leave a
little play so that the wheels turn well.
Repeat the same assembly for the other side. See Fig.1.1.
Step 2
Attach Cross Bar (P3) to the Undercarriage (P2) with Bolt (H2) and Nut (H7) as shown in the
picture STEP2.
Repeat the same assembly for the other side.
Make sure the Frame Plastic Caps (P12) are attached to the frame end of Undercarriage (P2).
Step 3
Attach the Net Post (P9) to the Undercarriage (P2), as shown in STEP 3.
Repeat the same assembly for the other side.
Put the Net (P14) to the Net Post (P9) after finishing the assembly.
20