DC Box - 7
Part No 9089-B
2019-12-23
Safety Considerations
Read all instructions before the machine/installa-
tion is commissioning.
The equipment must be installed and maintained
properly by quali
fi
ed personnel who have study
this user instruction. Dustcontrol does not take
responsibility for defective installation or
maintenance.
Warning! When using the DC Box, basic safety
precautions should always be followed to reduce
the risk of
fi
re, electric shock and personal injury,
including the following:
1.
Work Area Environment
Only use the machine for the puropose it is
intended for. Always follow the guidelines for
the particular material being colleted; e. g.
Asbestos.
2.
Spreading of Dust
Never use the DC Box without having the
suction working. When cleaning equipment in
the DC Box the door must always be closed.
Always keep the ventilation on for at least
3 minutes after the cleaning is
fi
nished before
opening the door.
3.
Personal Protection
Always use protection gloves and an overall.
Be sure to keep them clean.
4.
Maintain the machine with care
Keep the DC Box clean and be sure the
gaskets are tight. Follow the instructions.
5. Checking for damage
Check the machine regularly for damage. If
there are any damaged parts these should be
repaired by a Dustcontrol authorised service
centre.
8.
Warning
Use only accessories and replaceable parts
which are available from the Dustcontrol
catalogue. When using non-genuine parts,
especially
fi
lters and plastic sacks, dust leaks
could occur which may be hazardous to
health.
H x W x L
1750 x 800 x 1300 mm
H x W x L (DC AirCube 500)
2130 x 800 x 1300 mm
Outlet
Ø 76 mm
Collection sack 10 l
700 x 850 mm
Nominal
fl
ow
600 m
3
/h
Nominal
fl
ow (DC AirCube 500)
500 m
3
/h
Nominal pressure
3.5 kPa
Nominal pressure (DC AirCube 500) 495 Pa
Lighting 230
V
EN
G
LISH
Technical Data
