Dustbane Tracker 71000, Parts & Operation Manual

Page: 6 / 32

6 Parts & Operations Manual Tracker
6
Parts & Operations Manual
Tracker
Filters
Your vacuum cleaner is equipped with a secondary and a (High Efficiency) post fi lter. These filters capture fine dust particles and
protect the motor from dirt. Accumulated dirt in the bag compartment will be collected on this fi lter and may restrict motor
performance. It is important to change the f ilters regularly — approximately once a year, or as needed.
To Change the Secondary Filter
1.
Unplug the vacuum cleaner. Remove the bag compartment cover and remove the bag.
2.
Remove the secondary fi lter and replace with a new fi lter (Fig. 10 ).
3. Replace the bag and bag compartment cover.
NOTE: Neither of the fi lters can be washed and reused.
To Change the Post High Efficiency Filter
1. Unplug the vacuum cleaner. Remove the bag compartment cover.
2. Remove the fi l ter from the front of the bag compartment (Fig. 11 ).
3.
Insert a new filter and replace the bag compartment cover.
Edge Cleaning Feature
For best results when cleaning carpets near walls and stationary furniture, place the right
side of the vacuum nozzle along the wall or furniture.
Automatic Self-Adjusting Rug Nozzle
The Tracker upright vacuum cleaner is designed with an Automatic Self-Adjusting Rug nozzle. no manual adjustments are
required. The height of the rug nozzle is instantly and automatically adjusted to carpet pile height. This self-adjusting feature
allows the rug nozzle to fl oat evenly over all carpet pile surfaces.
Fig.
11
Fig.
10
Fig.
15
Fig.
14
Fig.
13
Fig.
12
Handle Adjustments
The handle on this vacuum cleaner can be set to one of three positions – upright, middle or low.
To adjust the handle
1. To release the handle, step on the on the left rear corner of the vacuum cleaner nozzle (Fig. 1 2 ).
2. Upright position – when cleaning tools are being used or for storage (Fig. 13 ). Handle locks in this position.
3. Middle position – for normal cleaning (Fig. 14 ).
4.
Low position – for cleaning under furniture (Fig. 15 ).
Filters
Your vacuum cleaner is equipped with a secondary and a (High Efficiency) post fi lter. These filters capture fine dust particles
and protect the motor from dirt. Accumulated dirt in the bag compartment will be collected on this filter and may restrict motor
performance. It is important to change the filters regularly — approximately once a year, or as needed.
To Change the Secondary Filter
• Unplug the vacuum cleaner. Remove the bag compartment cover and remove the bag.
• Remove the secondary fi lter and replace with a new fi lter (Fig. 10).
• Replace the bag and bag compartment cover.
NOTE: Neither of the fi lters can be washed and reused.
To Change the Post High Efficiency Filter
• Unplug the vacuum cleaner. Remove the bag compartment cover.
• Remove the filter from the front of the bag compartment (Fig. 11).
• Insert a new filter and replace the bag compartment cover.
Edge Cleaning Feature
For best results when cleaning carpets near walls and stationary furniture, place the right side
of the vacuum nozzle along the wall or furniture.
Automatic Self-Adjusting Rug Nozzle
The Tracker upright vacuum cleaner is designed with an Automatic Self-Adjusting Rug nozzle.
no manual adjustments are required. The height of the rug nozzle is instantly and automatically
adjusted to carpet pile height. This self-adjusting feature allows the rug nozzle to fl oat evenly over all carpet pile surfaces.
Handle Adjustments
The handle on this vacuum cleaner can be set to one of three positions – upright, middle or low.
To adjust the handle
• To release the handle, step on the on the left rear corner of the vacuum cleaner nozzle (Fig. 12).
• Upright position – when cleaning tools are being used or for storage (Fig. 13). Handle locks in this position.
• Middle position – for normal cleaning (Fig. 14).
• Low position – for cleaning under furniture (Fig. 15).
6
Parts & Operations Manual
Tracker
Filters
Your vacuum cleaner is equipped with a secondary and a (High Efficiency) post fi lter. These filters capture fine dust particles and
protect the motor from dirt. Accumulated dirt in the bag compartment will be collected on this fi lter and may restrict motor
performance. It is important to change the f ilters regularly — approximately once a year, or as needed.
To Change the Secondary Filter
1.
Unplug the vacuum cleaner. Remove the bag compartment cover and remove the bag.
2.
Remove the secondary fi lter and replace with a new fi lter (Fig. 10 ).
3. Replace the bag and bag compartment cover.
NOTE: Neither of the fi lters can be washed and reused.
To Change the Post High Efficiency Filter
1. Unplug the vacuum cleaner. Remove the bag compartment cover.
2. Remove the fi l ter from the front of the bag compartment (Fig. 11 ).
3.
Insert a new filter and replace the bag compartment cover.
Edge Cleaning Feature
For best results when cleaning carpets near walls and stationary furniture, place the right
side of the vacuum nozzle along the wall or furniture.
Automatic Self-Adjusting Rug Nozzle
The Tracker upright vacuum cleaner is designed with an Automatic Self-Adjusting Rug nozzle. no manual adjustments are
required. The height of the rug nozzle is instantly and automatically adjusted to carpet pile height. This self-adjusting feature
allows the rug nozzle to fl oat evenly over all carpet pile surfaces.
Fig.
11
Fig.
10
Fig.
15
Fig.
14
Fig.
13
Fig.
12
Handle Adjustments
The handle on this vacuum cleaner can be set to one of three positions – upright, middle or low.
To adjust the handle
1. To release the handle, step on the on the left rear corner of the vacuum cleaner nozzle (Fig. 1 2 ).
2. Upright position – when cleaning tools are being used or for storage (Fig. 13 ). Handle locks in this position.
3. Middle position – for normal cleaning (Fig. 14 ).
4.
Low position – for cleaning under furniture (Fig. 15 ).