27
ENGLISH
ENGLISH
27
The storage battery gets flat
too fast during use, the
recharging with an electronic
battery-charger is too fast and
at the end the storage battery
gives the right voltage (about
2,14V for each empty element),
but it turns out to be not
uniformly charged when tested
with densimeter
• the storage battery, already
filled with acid by the
Manufacturer, has been stored
for a too long time before being
recharged and used for the first
time
• if the recharging with a
normal storage-charger is not
effective, it is necessary to
carry out a double recharging
consisting in:
- a slow recharging of about
10 hours with a current equal
to 1/10 of the rated capacity
expressed in 5 hours (ex.: for
a storage battery of 100Ah(5),
the current should be 10A,
realized by a manual battery-
charger);
- one-hour pause;
- charging with a normal
battery-charger
After recharging with an
electronic battery-charger the
storage-battery does not show
the correct voltage (about
2,14V for each empty element)
and only one or few elements
turn out to be flat when tested
with densimeter
• the storage battery has not
been connected to the battery-
charger
• connect the battery-charger
to the storage battery
connector
• the battery-charger and the
power socket to which the
storage battery is connected are
not compatible
• check that the power supply
characteristics indicated on
the battery-charger plate are
compliant with those of the
mains
• the battery-charger has not
been installed correctly
• taking into account the actual
voltage available at the
socket, check that the
connections of the
transformer primary circuit in
the battery-charger are
correct (at this purpose read
the manual to the battery-
charger)
• the battery-charger does not
work
• check that there is voltage at
the battery-charger, that the
fuses are not interrupted and
that there is current at the
storage battery; in addition
try to charge by means of
another rectifier: if the
battery-charger does not
work, call the after-sales
service staff communicating
the serial number of the
battery-charger
After recharging with an
electronic battery-charger the
storage-battery does not show
the correct voltage (about
2,14V for each empty element)
and only one or few elements
turn out to be flat when tested
with densimeter
• one or more elements are
damaged
• replace, if possible, the
damaged elements. For
monoblock storage batteries
at 6V or 12V, replace the
whole storage battery
Summary of Contents for Hurricane 850 XTT
