Dustbane 355 Pro Series, Operations & Parts Manual

Page: 18 / 28

OPERATION SECTION
ENGLISH
If you observe the recommendations listed below, this will ensure maximum performance by the appliance, the longest possible
life and a high level of safety.
s $ONOTCLEANTHEAPPLIANCEWITHSOLVENTTHEBODYANDACCESSORIESAREINPLASTICANDTHEREFOREMAYGETDAMAGE
s .EVERIMMERSETHEAPPLIANCEINWATER
s $ONOTCLEANTHEAPPLIANCEINWATER
s $ONOTLEAVETHEAPPLIANCEUNATTENDEDWHILEITISRUNNING
s .EVERPUTTHEAPPLIANCENEARTOHEATSOURCES
s 2EMOVETHEPOWERPLUGFROMTHEPOWERSOCKETAFTEREACHUSEOFTHEAPPLIANCE
s )FTHEPOWERLEADANDPOWERSOCKETAREDAMAGEDREPLACETHEMIMMEDIATELYATANAUTHORISEDSERVICECENTRE
s $ONOTUSETHEAPPLIANCEASALIQUIDSUCTIONDEVICE
s "EFOREEVERYMAINTENANCEORREPLACEMENTJOBREMOVETHEAPPLIANCEASPOWERPLUGFROMTHEPOWERSOCKET
s $ONOTSUCKINLIGHTEDCIGARETTEENDSORINFLAMMABLEMATERIALS
s 2EMOVETHEPLUGBYPULLINGTHEPLUGBODYANDNOTTHEPOWERLEAD
s 3TRCTLYUSEORIGINALDUSTBAGSANDFILTERS
The suction engine is provided with an automatically reset termal limiter, which overrides in order to protect the engine from
over-heating. It overrides in cases such as overload, full bag, clogging up of filters or of suction piping. In case of override by this
device, the suction engine shuts down, and it will take some 10-15 minutes for it to cool. After that, the engine will be automati-
cally re-started, provided that the machine has not been turned off or disconnected from the mains.
NOTE: The manufacture reserves the right to make any modifications without prior notice.
IMPORTANT
Before attempting any maintenance job, always remove the power plug.
For all maintenance jobs, always contactt our authorised service centres.