8
Installation
The actual connection can vary depending on the chosen installation option. The connection
shown is only an example.
8.1
Installation and routeing of hoses and pipes
❯
Establish connections between the pipe system and the unit using the flexible hoses supplied. This
will prevent vibrations from being transmitted to the pipe system.
❯
The connection between the pipe line and unit suction connection should be kept as short as possi-
ble and straight, without bends.
❯
Install the drain hoses with a downward gradient so that the waste water can drain off.
❯
Waste water connections must be implemented in accordance with applicable local and national reg-
ulations.
V 300 S
2
2
3
1
1
4
5
6
1
Hose clamp 25-40 mm
2
Suction hose
Æ
30 mm (internal)
3
Waste air pipe (aluminium)
Æ
30 mm inside
4
Hose clip
Æ
28 mm
5
Hose sleeve
6
Waste water hose
Æ
20 mm (internal)
Assembly
7119100007L02 1909V001
29
EN
