–
Scaler instrument P4
, 120
m
m, for the
removal of supragingival coatings on smooth
surfaces and for interdental areas.
POWER
2–3 LEDs: 40 % - 60 % operating perform-
ance
P4
11.4 After every treatment
End of treatment
❯
Dismantle the instrument with the tool kit cover.
❯
After every treatment, all parts used must be
cleaned, disinfected and, if necessary, steri-
lised, "13 Reprocessing".
12 Cleaning
12.1 Cleaning of the outside surfa-
ces
All outside surfaces must be cleaned and disin-
fected if they are contaminated or soiled.
– Surface of the device
– Handpiece hose
– Fluid container
– Tool kit for Scaler without instruments
As the surface disinfectant, we recommend using
a disinfectant that is compatible with the materi-
als and meets the general dental hygiene stand-
ards, e.g.:
– Dürr Dental FD 322 rapid surface disinfectant
– Dürr Dental FD 350 disinfection wipes
– Dürr Dental FD 366 sensitive rapid surface dis-
infectant
NOTICE
Liquid can cause damage to the unit.
❯
Do not spray the unit with cleaning and
disinfectant agents.
❯
Make sure that liquid does not get
inside the unit.
❯
For pre-cleaning, remove coarse organic soiling
with a paper towel.
❯
Clean the surfaces with a moist, soft, lint-free
cloth.
Usage
28
9000-615-32/02 2012V003
EN
