manualshive.com logo in svg

DuroStar DUAL FUEL DS4400EHF, User Manual

The DuroStar DUAL FUEL DS4400EHF is a versatile power generator that ensures you're never left in the dark. With the user manual available for free download from our website, you can easily access important instructions and guidelines on operating and maintaining this exceptional product.

Share
Download
background image

Changing / Inspecting the Carbon Brushes

The carbon brushes in conjunction with the AVR regulates power from the generator. The 
carbon brushes are wearable parts and should be inspected every 250 running hours.

Remove generator cover

Remove bolt from brush

Disconnect AVR wires

Remove the 2 bolts of the generator cover then pull the cover 

off the generator.

Remove the bolt holding the carbon brush.

Remove the two wires from the AVR on the carbon brush

1.

2.

3.

55

Summary of Contents for DUAL FUEL DS4400EHF



































































Reviews:

No comments

Related manuals for DUAL FUEL DS4400EHF

Radionette Duett Instruction Manual preview
Duett
Brand: Radionette Pages: 152
Mase Generators MARINER 1200 Use, Maintenance And Installation Manual preview
MARINER 1200
Brand: Mase Generators Pages: 92
MayPole MP3767 Manual preview
MP3767
Brand: MayPole Pages: 2
Sangean PR-D4W Manual preview
PR-D4W
Brand: Sangean Pages: 22
K&S BASIC KSB 6000D Owner'S Manual preview
KSB 6000D
Brand: K&S BASIC Pages: 23
Tesla TI4676 User Manual preview
TI4676
Brand: Tesla Pages: 37
Grundig Music 61 Manual preview
Music 61
Brand: Grundig Pages: 162
mikroElektronika PULSE click Quick Start Manual preview
PULSE click
Brand: mikroElektronika Pages: 3
Vector ElectroMate VEC097 Owner'S Manual & Warranty preview
ElectroMate VEC097
Brand: Vector Pages: 20
Kohler 10EOR Service preview
10EOR
Brand: Kohler Pages: 84
Denver MT-773 User Manual preview
MT-773
Brand: Denver Pages: 10
Zebronics ZEB-CONGA User Manual preview
ZEB-CONGA
Brand: Zebronics Pages: 6
A-iPower SUA12000EAP Owner'S Manual preview
SUA12000EAP
Brand: A-iPower Pages: 112
Tivoli Audio PAL+BT Owner'S Manual preview
PAL+BT
Brand: Tivoli Audio Pages: 124
LG DP471BT Manual preview
DP471BT
Brand: LG Pages: 18
LG DP560 Owner'S Manual preview
DP560
Brand: LG Pages: 20
LG DP461A Manual preview
DP461A
Brand: LG Pages: 18
LG DRP4 Owner'S Manual preview
DRP4
Brand: LG Pages: 35

Brands by name

Popular brands

Load more brands