manualshive.com logo in svg

DuroStar DS4000WGE, User Manual

The DuroStar DS4000WGE is a reliable and powerful portable generator that delivers consistent power during emergencies or outdoor activities. Ensure you get the most out of your generator by downloading the free Owner's Manual from our website, manualshive.com, so you can operate it safely and efficiently.

Share
Download
background image

Drain gas from generator

With a receptacle underneath the generator to catch the gas, 

turn the fuel valve to the “ON” position. Drain all the gas from 

the generator.

4.

Shut fuel valve off

Replace fuel filter cup

Store emptied gas

Turn the fuel valve to the “OFF” position.

Reinstall the fuel filter cup.

Store the emptied gasoline in a suitable place and add fuel 
stabilizer to keep fuel fresh and usable.

5.

6.

7.

47

Summary of Contents for DS4000WGE































































Reviews:

No comments

Related manuals for DS4000WGE

Radius GP350 User Manual preview
GP350
Brand: Radius Pages: 7
Naxa NPB-251 Instruction Manual preview
NPB-251
Brand: Naxa Pages: 20
GENMAX GM1200i User Manual preview
GM1200i
Brand: GENMAX Pages: 28
Vector ElectroMate VEC095 Owner'S Manual & Warranty preview
ElectroMate VEC095
Brand: Vector Pages: 20
Ericsson EDACS PRISM HP/LPE-200 Operator'S Manual preview
EDACS PRISM HP/LPE-200
Brand: Ericsson Pages: 104
OGSI OG-75 Installation, Operation & Maintenance Manual preview
OG-75
Brand: OGSI Pages: 52
Pace IntelliHeat ST 115 Operation And Maintenance Manual preview
IntelliHeat ST 115
Brand: Pace Pages: 20
Motorola APX 3000 User Manual preview
APX 3000
Brand: Motorola Pages: 82
Motorola APX7000XE 1.5 Manual preview
APX7000XE 1.5
Brand: Motorola Pages: 34
Motorola MT060 Owner'S Manual preview
MT060
Brand: Motorola Pages: 28
Motorola APX 4000 Basic Service Manual preview
APX 4000
Brand: Motorola Pages: 526
Motorola APX Series Manual preview
APX Series
Brand: Motorola Pages: 29
PENTAGON GALE FORCE PT8500E Instruction Manual preview
GALE FORCE PT8500E
Brand: PENTAGON Pages: 25
Sony SRS-RF930RK - Wireless Speaker Sys Operating Instructions preview
SRS-RF930RK - Wireless Speaker Sys
Brand: Sony Pages: 2
Sony SA-VE356T (Spanish) Instrucciones De Operación preview
SA-VE356T
Brand: Sony Pages: 2
Sony XDR-M1 Operating Instructions preview
XDR-M1
Brand: Sony Pages: 2
Sony FDL-PT222 - Watchman Lcd Color Tv Service Manual preview
FDL-PT222 - Watchman Lcd Color Tv
Brand: Sony Pages: 24
Sony SRS-D313 Service Manual preview
SRS-D313
Brand: Sony Pages: 14

Brands by name

Popular brands

Load more brands