Duronic FPS, Manual

Page: 6 / 40

6
Before You Begin
Assembly Instructions
• Remove all packaging and set aside.
• Clear a large enough area to assemble the screen. Make sure the area is
larger than the sides of the screen.
• Assembly of the screen can be done by one person.
• Do not assemble the screen in areas of high temperature to avoid
incurring any damage to the screen.
• Ensure that you read through this manual entirely before beginning to
assemble the screen.
Lift out the projector screen from the box and place on an even floor.
In order to protect the screen from getting marked or stained, ensure that the
screen is kept away from dust and dirt.
Decide on a location for your screen. The FPS screen is a freestanding
screen, so can stand upright in almost any location you need it to.
1. Rotate the two support feet outwards so that they are 90 degrees from
the screen case.
2. Open the lock by pressing the UNLOCK button, and then open the top
of the screen case.
90°
90°