Duronic BL4, Manual

Page: 13 / 64

13
Care And Cleaning
This product contains no user serviceable parts. Refer service to qualified
service personnel.
1. Before cleaning, unplug the blender.
2. Always wash immediately after use for easier cleaning. Don’t let food dry on
the jug assembly as this will make cleaning difficult.
3. Pour a little warm soapy water into the jug and turn the knob to P position
for a few seconds. And then empty the jug.
4. Dismantle all detachable parts. Lift the jug assembly off the motor unit.
Detach the blade assembly by turning it clockwise from the jug base, and
remove the seal ring 2 and blade assembly (see fig.9). In addition, detach the
jug cover seal ring 1 from the jug cover.
Fig.
9.