DUROMAX DUAL FUEL XP4500IH User Manual Download Page 20

Page: 20 / 66

PACKAGE CONTENTS

Your generator comes with the items listed below. Please check to see that all of the following
items are included with your generator.

●

Note: Actual tools may differ in appearance or design from image shown.

Double Sided

Screw Driver

Oil Funnel w/ hose

Spanner

Spark Plug Wrench

Plug Ends

Phillips and slot blade

screwdriver used for generator

maintenance.

Used to add oil to the

generator without messy spills.

Assorted wrenches used in

generator maintenance and

assembly. Commonly 8mm,

12mm

Used in spark plug

maintenance, inspection, and

installation.

Plug heads for the receptacles

found on the generator are

included to make or rewire

your own cords.

Battery Tender

Used to charge the battery

when in storage

Summary of Contents for DUAL FUEL XP4500IH



































































Search results

Summary of Contents for DUAL FUEL XP4500IH

Reviews:

Related manuals for DUAL FUEL XP4500IH

Brands by name

Popular brands

DUROMAX DUAL FUEL XP4500IH, User Manual

Search results

Summary of Contents for DUAL FUEL XP4500IH

Reviews:

Related manuals for DUAL FUEL XP4500IH

Brands by name

Popular brands