manualshive.com logo in svg

DUROMAX DUAL FUEL XP4500IH, User Manual

The DUROMAX DUAL FUEL XP4500IH is a reliable generator that runs on both gasoline and propane, offering versatility in any situation. To ensure optimum performance, don't forget to refer to the comprehensive User Manual which can be conveniently downloaded for free from manualshive.com. Unleash the product's potential with ease!

Share
Download
background image

37

Push the start button

The remote start has two buttons, start and stop.  Press the 
start button two times in sucession to start the generator.

6.

5.

Turn start switch on

The start switch is located on the left side of the front power 
panel next to the low idle. Press the switch up to the start 
position to allow the generator to start.

Summary of Contents for DUAL FUEL XP4500IH



































































Reviews:

No comments

Related manuals for DUAL FUEL XP4500IH

A2Z Ozone A-7000 Operating Manual preview
A-7000
Brand: A2Z Ozone Pages: 13
Hytera PD60 UL913 Series User Manual preview
PD60 UL913 Series
Brand: Hytera Pages: 37
Real-El X-713 Operation Manual preview
X-713
Brand: Real-El Pages: 7
Powermate PM0525312.03 User Manual preview
PM0525312.03
Brand: Powermate Pages: 12
Honeywell HW5500 - 5500 Portable Generator Owner'S Manual preview
HW5500 - 5500 Portable Generator
Brand: Honeywell Pages: 100
Bluetti AC200 User Manual preview
AC200
Brand: Bluetti Pages: 17
PURE Pop Midi with Bluetooth User Manual preview
Pop Midi with Bluetooth
Brand: PURE Pages: 26
Oontz Angle 3 ULTRA Quick Start Manual preview
Angle 3 ULTRA
Brand: Oontz Pages: 28
Micro Innovations MM550MF Quick Installation Manual preview
MM550MF
Brand: Micro Innovations Pages: 2
Curtis DVD7026 Preliminary Specification Sheet preview
DVD7026
Brand: Curtis Pages: 1
Honda EM500 Owner'S Manual preview
EM500
Brand: Honda Pages: 37
Honda EM3000 Owner'S Manual preview
EM3000
Brand: Honda Pages: 41
Honda EM25 Owner'S Manual preview
EM25
Brand: Honda Pages: 49
VIETA VM-HD109BK User Manual preview
VM-HD109BK
Brand: VIETA Pages: 37
Schloder SESD 216 Operation Manual preview
SESD 216
Brand: Schloder Pages: 20
Briggs & Stratton 030547-01 Operator'S Manual preview
030547-01
Brand: Briggs & Stratton Pages: 84
Bose PORTABLE HOME SPEAKER Manual preview
PORTABLE HOME SPEAKER
Brand: Bose Pages: 47
Tektronix TYPE 109 Instruction Manual preview
TYPE 109
Brand: Tektronix Pages: 56

Brands by name

Popular brands

Load more brands