2.11.2
Height of the sewing feet locked with the hand lever
Caution: Danger of injury!
Turn off the main switch.
Only check and adjust the sewing foot lifting when the machine is
switched off.
Standard checking
The sewing feet 4 are locked into the raised position with hand lever 1
to change the sewing feet, for example, or to run the sewing machine
without material or to wind the hook thread.
The sewing feet 4 locked into the raised position with the hand lever
should be 10 mm away from the throat plate.
–
Bring both sewing feet to the same level.
–
Raise and lock the sewing feet with the hand lever.
–
Check the elevation height.
Correction
–
Raise the sewing feet.
–
Put a spacer (10 mm) under the sewing feet.
–
Undo the screws on the elevation lever 3.
–
Press the elevation lever 1 down.
–
Press lever 3 onto the eccentric disc 2.
–
Do up the screws on the elevation lever 3.
32
1
3
2
4
Summary of Contents for M-Type 869
Page 4: ......
